Soft Robotic System (video)

 





Comments

Post a Comment

Popular posts from this blog

A Circular Pneumatic Muscle Actuator (CPMA) Inspired by Human Skeletal Muscles

 Biological inspiration provides numerous artificial benefits to our lives, such as a pneumatic muscle actuator (PMA), which was presented by Joseph L. McKibben in the 1950’s and is built from an inner rubber tube bound by a braided sleeve. The construction of the PMA defines the type of actuator. By selecting the length of both the inner tube and the braided sleeve, the PMA acts as a contraction actuator if the braided angle (θ), which is measured between the braided stand and the vertical line, is less than 54.70, and as an extension actuator if the angle is more than 54.70. Moreover, the PMA will produce a tensile force for the contractor type and an extension force for the extensor PMA. The force value for both types depends on the structure and the material specifications of the PMA. Full paper can found at  https://ieeexplore.ieee.org/abstract/document/8404889
Read more

The Design, Kinematics and Torque Analysis of the Self-Bending Soft Contraction Actuator

 This article presents the development of a self-bending contraction actuator (SBCA) through the analysis of its structure, kinematics, and torque formulas, and then explores its applications. The proposed actuator has been fabricated by two methods to prove the efficiency of the human body inspiration, which represents the covering of human bones by soft tissues to protect the bone and give the soft texture. The SBCA provides bending behaviour along with a high force to- weight ratio. As with the simple pneumatic muscle actuator (PMA), the SBCA is soft and easy to implement. Both the kinematics and the torque formula presented for the SBCA are scalable and can be used with different actuator sizes. The bending actuator has been tested under an air pressure of up to 500 kPa, and the behaviour of its bending angle, parameters, dimensions, and bending torques have been illustrated. On the other hand, the experiments showed the efficient performances of the actuator and validate the p...
Read more

3D POSITION MAPPING OF CONTINUUM ARM

 Modelling a continuum arm is one of the major challenges in soft robotic researches. An accurate position model allows wider use of continuum robot arms in industrial and medical applications. Furthermore, accurate control can be achieved. This paper illustrates the 3D position of a constructed soft arm from 4 pneumatic muscle actuators (PMAs) in parallel, and models the movement of its free end in space. The performance of the contraction and extension PMAs and the behaviour of the contraction and extension arms are analysed, and a comparison between the two arms is explained. Finally, mathematical models are presented and validated. Keywords— Contraction and Extension PMA, Continuum Arm, Experimental Model, 3D Position, Mapping. The full paper can be found at: https://ieeexplore.ieee.org/abstract/document/7810151
Read more